U0142: U0142: Lost Communication with Body Control Module B
Standard SAE J1979 OBD-II diagnostic trouble code definitions, freeze-frame sensor telemetry, electrical multimeter benchmarks, and step-by-step DIY repair flowcharts.
1. Symptoms & Warning Signs
When fault code U0142 is triggered by the Engine Control Module (ECM), drivers frequently experience the following symptoms:
2. Most Likely Causes
Root cause statistical probability compiled from NHTSA ODI complaint telemetry, ASE Master Technician field records, and OEM Factory Service Manual diagnostic trees for U0142:
3. Step-by-Step DIY Repair Instructions
Connect an OBD-II scan tool and record freeze frame sensor telemetry for code U0142 to note engine RPM, load, and voltage when the fault triggered.
Inspect the electrical connector and wiring harness related to U0142 for chafing, corrosion, moisture, or pin push-out.
Measure circuit voltage supply (12V B+ or 5V reference) and sensor/actuator resistance according to factory repair manual specifications.
Install a new OEM-grade replacement part, torque fasteners to factory spec, and ensure electrical locking tabs click firmly.
Clear all stored DTCs from vehicle memory and perform an OBD-II drive cycle to confirm the diagnostic monitor resets to 'Ready'.
Equipment for Diagnosing Universal Automotive (U0142)
Universal Automotive OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Universal Automotive.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Fix U0142 on 25 Specific Automakers
Manufacturer-specific wiring harnesses, sensor pinouts, and Technical Service Bulletins for U0142:
4. U0142 Frequently Asked Questions
What does trouble code U0142 mean?
Code U0142 indicates that the vehicle's onboard diagnostic computer detected an out-of-range signal or circuit malfunction in the network system.
Will code U0142 clear on its own?
Once the underlying mechanical or electrical fault is repaired, the ECU will automatically extinguish the warning light after 3 consecutive successful trip cycles without detecting the fault.