MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0092 on Chevrolet: Symptoms, Causes & Fix

Fuel Pressure Regulator 1 Control Circuit High

Official technical diagnostic wire for fault code P0092 specifically affecting Chevrolet vehicles (Silverado, Equinox, Malibu, Tahoe, Traverse).

Sensor Voltage Ref
0.1V – 5.0V Ref
Chevrolet Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Not Recommended
High urgency level
Est. Repair Cost
$120 - $350
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Chevrolet Model for P0092:

8 Models Available

1. Common Symptoms on Chevrolet Vehicles

When Chevrolet Engine Control Modules (ECM) trigger fault code P0092, drivers typically report:

Check Engine Light on on Chevrolet Powertrains
High fuel pressure on Chevrolet Powertrains
Black exhaust smoke on Chevrolet Powertrains

2. Root Causes on Chevrolet Engines

Historical diagnostic claims across Chevrolet engines point to the following failure distribution:

55%
Short to 12V power in harness (Chevrolet OEM Part)
25%
Failed regulator solenoid (Chevrolet OEM Part)
12%
ECM fault (Chevrolet OEM Part)

3. Step-by-Step Fix Protocol for Chevrolet

01
Scan and Record Freeze Frame Telemetry

Connect an OBD-II scan tool and record freeze frame sensor telemetry for code P0092 to note engine RPM, load, and voltage when the fault triggered. on Chevrolet engines.

Required Tool: OBD-II Scanner
02
Inspect Related Wiring Harness & Connectors

Inspect the electrical connector and wiring harness related to P0092 for chafing, corrosion, moisture, or pin push-out. on Chevrolet engines.

Required Tool: Flashlight, Multimeter
03
Test Component Resistance & Voltage Supply

Measure circuit voltage supply (12V B+ or 5V reference) and sensor/actuator resistance according to factory repair manual specifications. on Chevrolet engines.

Required Tool: Digital Multimeter
04
Replace Defective Component

Install a new OEM-grade replacement part, torque fasteners to factory spec, and ensure electrical locking tabs click firmly. on Chevrolet engines.

Required Tool: Hand Tool Socket Set, Torque Wrench
05
Clear Trouble Codes & Complete Drive Cycle

Clear all stored DTCs from vehicle memory and perform an OBD-II drive cycle to confirm the diagnostic monitor resets to 'Ready'. on Chevrolet engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Chevrolet (P0092)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Chevrolet OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Chevrolet.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for ChevroletVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Chevrolet P0092 Frequently Asked Questions

What does code P0092 mean on a Chevrolet?

On Chevrolet vehicles, P0092 indicates that the Engine Control Module (ECM) detected fuel pressure regulator 1 control circuit high. This typically points to Short to 12V power in harness or Failed regulator solenoid.

Can I continue driving my Chevrolet with code P0092?

No. Short to power in regulator circuit. Because this code carries a High severity rating on Chevrolet powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0092 on a Chevrolet?

Estimated DIY parts cost ranges from $120 - $350, while professional shop repairs at an authorized Chevrolet dealership or independent specialist typically range from $180 to $380 including diagnostic labor.