C0051 on Dodge: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code C0051 specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet, Journey).
Select Your Dodge Model for C0051:
1. Common Symptoms on Dodge Vehicles
When Dodge Engine Control Modules (ECM) trigger fault code C0051, drivers typically report:
2. Root Causes on Dodge Engines
Historical diagnostic claims across Dodge engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Dodge
Center steering wheel and perform SAS zero-point calibration using an advanced bi-directional scan tool. on Dodge engines.
Turn wheel lock-to-lock. Angle should smoothly track from -540° to +540°. If it drops out or reads 0° constantly, sensor is defective. on Dodge engines.
Disconnect battery, remove airbag and steering wheel, replace steering angle sensor assembly, reassemble and recalibrate. on Dodge engines.
Clear DTCs and verify traction control light stays off during test drive. on Dodge engines.
Equipment for Diagnosing Dodge (C0051)
Dodge OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Dodge.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Dodge C0051 Frequently Asked Questions
What does code C0051 mean on a Dodge?
On Dodge vehicles, C0051 indicates that the Engine Control Module (ECM) detected steering wheel position sensor circuit. This typically points to Faulty Steering Angle Sensor (SAS) in clockspring / steering column or Steering angle calibration lost after wheel alignment or battery disconnect.
Can I continue driving my Dodge with code C0051?
Caution. ABS, StabiliTrak, and Electronic Stability Control (ESP) will be disabled. Because this code carries a High severity rating on Dodge powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code C0051 on a Dodge?
Estimated DIY parts cost ranges from $150 - $480 (DIY: $60 - $180), while professional shop repairs at an authorized Dodge dealership or independent specialist typically range from $180 to $380 including diagnostic labor.