FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.
P0571DodgeDodge PlatformHigh Severity

P0571 on Dodge: Symptoms, Causes & DIY Fix

Official technical diagnostic wire for fault code P0571 (P0571: Brake Switch A Circuit Malfunction) specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet).

DIY Parts Estimate
$70 - $180 (DIY: $15 - $40)
Dodge OEM Direct Fit
Shop Labor Quote
$180 – $380
Based on $120/hr labor
Drivability Status
Drivable (Short Trip)
High urgency level
Est. DIY Time
45 – 90 Min
Basic hand tools
Check P0571 On Another Make:
ToyotaBMWMercedes-BenzLexusFordHyundaiCadillacTeslaChevroletHonda

1. Symptoms of P0571 on Dodge

When the Engine Control Module (ECM/PCM) on your Dodge logs fault code P0571, drivers commonly observe:

System alert or indicator light illuminated (P0571) on Dodge (Charger, Challenger)
Intermittent performance throttling or unexpected operation halts on Dodge (Charger, Challenger)
Audible sensor relay clicking or anomalous status telemetry in dashboard logs on Dodge (Charger, Challenger)
Degraded operational throughput or error dialog popups on startup on Dodge (Charger, Challenger)
Readiness monitors failing state emissions or system compliance audits on Dodge (Charger, Challenger)

2. Most Likely Causes on Dodge

Historical warranty claims and technical repair bulletins for Dodge point to the following failure distribution:

55%
Component aging, oxidation, or degraded internal circuit element (Brake Pedal Position Switch) (Dodge OEM Part)
25%
Wiring harness abrasion, loose terminal pin, or ground voltage float (Dodge OEM Part)
12%
Outdated firmware microcode or incompatible software driver update (Dodge OEM Part)
8%
Thermal stress or excessive operational duty-cycle fatigue (Dodge OEM Part)
8%
Contamination from carbon buildup, moisture ingress, or dirty filtration (Dodge OEM Part)

3. Step-by-Step DIY Repair Guide for Dodge

01
Connect Diagnostic Scanner / Logging Monitor to Retrieve Telemetry

Interface with the diagnostic port or system console using verified scanning hardware. Record freeze-frame data, active sub-codes, and timestamps to isolate whether P0571 is static or intermittent. on Dodge vehicles (Charger, Challenger).

Required Tool: Flashlight, 1/4 ratchet
02
Perform Physical & Electrical Circuit Inspection

Visually inspect the physical component (Brake Pedal Position Switch), connector pins, and associated wiring harnesses for signs of corrosion, thermal melting, or loose grounding clips. on Dodge vehicles (Charger, Challenger).

Required Tool: Multimeter, Flashlight, Contact Cleaner Spray
03
Component Testing & Resistance / Voltage Verification

Measure reference voltages and resistance thresholds against manufacturer factory specifications. Replace any component failing nominal impedance tolerances. on Dodge vehicles (Charger, Challenger).

Required Tool: Flashlight, 1/4 ratchet
04
Execute Component Replacement or Software Configuration Patch

Install genuine OEM replacement hardware or execute registry / service commands. Ensure all mounting bolts are torqued to factory specifications. on Dodge vehicles (Charger, Challenger).

Required Tool: Standard Hand Tool Set / Terminal Commands
05
Clear Diagnostic Trouble Code & Complete Verification Drive Cycle

Erase the fault code from non-volatile memory. Perform a standard verification cycle (e.g. 15-minute mixed drive or system stress benchmark) to ensure monitors reset to 'Ready' state without recurrent fault flags. on Dodge vehicles (Charger, Challenger).

Required Tool: OBD-II Code Reader / Diagnostic Suite

4. Dodge P0571 FAQs

What causes code P0571 to trigger on a Dodge?

On Dodge vehicles, P0571 is most frequently caused by Component aging, oxidation, or degraded internal circuit element (Brake Pedal Position Switch) or Wiring harness abrasion, loose terminal pin, or ground voltage float. Factory sensor degradation or wiring harness wear near the engine bay are common factors.

Can I safely drive my Dodge with code P0571?

Caution. Limited operation permitted only to reach a nearby repair facility or backup critical personal files. Given that P0571 carries a High severity rating on Dodge vehicles, we advise performing diagnostic scanning via the OBD-II port before extended driving.

How much does it cost to fix P0571 on a Dodge?

DIY replacement parts typically range between $70 - $180 (DIY: $15 - $40). If serviced at an authorized Dodge dealership, expect an additional $120–$250 in professional labor based on their $120/hr hourly rate.