P2187 on Dodge: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P2187 specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet, Journey).
Select Your Dodge Model for P2187:
1. Common Symptoms on Dodge Vehicles
When Dodge Engine Control Modules (ECM) trigger fault code P2187, drivers typically report:
2. Root Causes on Dodge Engines
Historical diagnostic claims across Dodge engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Dodge
Check STFT and LTFT. If trims are +20% at idle and drop to +3% at 2,500 RPM, a vacuum leak is 100% confirmed. on Dodge engines.
Try to remove oil filler cap while engine idles. If cap is held down with strong vacuum suction and engine whines, the PCV diaphragm is ruptured. on Dodge engines.
Connect smoke machine to intake to identify leaking PCV hoses, manifold gaskets, or brake booster lines. on Dodge engines.
Install a new OEM PCV oil separator assembly or replace cracked vacuum hoses. on Dodge engines.
Clear DTCs and verify fuel trims return to ±5% at idle. on Dodge engines.
Equipment for Diagnosing Dodge (P2187)
Dodge OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Dodge.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Dodge P2187 Frequently Asked Questions
What does code P2187 mean on a Dodge?
On Dodge vehicles, P2187 indicates that the Engine Control Module (ECM) detected system too lean at idle (bank 1). This typically points to Torn diaphragm in PCV valve / oil separator (common on VW/Audi 2.0T) or Intake manifold gasket or vacuum hose leak.
Can I continue driving my Dodge with code P2187?
Yes, for moderate driving. Fix promptly to prevent unmetered air from causing lean idle misfires. Because this code carries a Medium severity rating on Dodge powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P2187 on a Dodge?
Estimated DIY parts cost ranges from $120 - $480 (DIY: $35 - $150), while professional shop repairs at an authorized Dodge dealership or independent specialist typically range from $180 to $380 including diagnostic labor.