P0123 on GMC: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P0123 specifically affecting GMC vehicles (Sierra 1500, Yukon, Acadia, Canyon, Terrain).
Select Your GMC Model for P0123:
1. Common Symptoms on GMC Vehicles
When GMC Engine Control Modules (ECM) trigger fault code P0123, drivers typically report:
2. Root Causes on GMC Engines
Historical diagnostic claims across GMC engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for GMC
Connect an OBD-II scan tool and record freeze frame sensor telemetry for code P0123 to note engine RPM, load, and voltage when the fault triggered. on GMC engines.
Inspect the electrical connector and wiring harness related to P0123 for chafing, corrosion, moisture, or pin push-out. on GMC engines.
Measure circuit voltage supply (12V B+ or 5V reference) and sensor/actuator resistance according to factory repair manual specifications. on GMC engines.
Install a new OEM-grade replacement part, torque fasteners to factory spec, and ensure electrical locking tabs click firmly. on GMC engines.
Clear all stored DTCs from vehicle memory and perform an OBD-II drive cycle to confirm the diagnostic monitor resets to 'Ready'. on GMC engines.
Equipment for Diagnosing GMC (P0123)
VVT Oil Control Solenoid Valve
Restores accurate camshaft timing and oil pressure regulation on GMC.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. GMC P0123 Frequently Asked Questions
What does code P0123 mean on a GMC?
On GMC vehicles, P0123 indicates that the Engine Control Module (ECM) detected throttle/pedal position sensor/switch a circuit high input. This typically points to TPS signal shorted to 5V reference or Broken sensor ground wire.
Can I continue driving my GMC with code P0123?
No. Throttle signal pegged at 5.0V. Because this code carries a Critical severity rating on GMC powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P0123 on a GMC?
Estimated DIY parts cost ranges from $140 - $420, while professional shop repairs at an authorized GMC dealership or independent specialist typically range from $180 to $380 including diagnostic labor.