MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0705 on Honda: Symptoms, Causes & Fix

Transmission Range Sensor Circuit Malfunction (PRNDL Input)

Official technical diagnostic wire for fault code P0705 specifically affecting Honda vehicles (Civic, Accord, CR-V, Pilot, HR-V).

Sensor Voltage Ref
0.1V – 5.0V Ref
Honda Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Drivable (Short Trip)
High urgency level
Est. Repair Cost
$120 - $450 (DIY: $40 - $160)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Honda Model for P0705:

8 Models Available

1. Common Symptoms on Honda Vehicles

When Honda Engine Control Modules (ECM) trigger fault code P0705, drivers typically report:

Check Engine Light on on Honda Powertrains
Vehicle will not crank/start in Park (starts only in Neutral) on Honda Powertrains
Gear indicator on dashboard (P R N D 1 2) is blank or displays wrong gear on Honda Powertrains
Transmission shifts harshly or goes into 3rd gear limp mode on Honda Powertrains
Reverse backup lights fail to illuminate on Honda Powertrains

2. Root Causes on Honda Engines

Historical diagnostic claims across Honda engines point to the following failure distribution:

55%
Misaligned or faulty Transmission Range Sensor / Neutral Safety Switch (NSS) (Honda OEM Part)
25%
Corroded or water-logged connector on transmission side (Honda OEM Part)
12%
Stretched or misadjusted shift linkage cable (Honda OEM Part)
8%
Broken internal switch contacts (Honda OEM Part)

3. Step-by-Step Fix Protocol for Honda

01
Check PRNDL Live Data

Move gear selector through all positions while monitoring scan tool TR PID to see which gear positions fail to register. on Honda engines.

Required Tool: OBD-II Scanner
02
Inspect Shift Cable Alignment

Ensure the mechanical shift linkage fully clicks the transmission lever into the physical detent for Park and Neutral. on Honda engines.

Required Tool: Pliers, Socket Set
03
Test Neutral Safety Switch Continuity

Use multimeter to check continuity across switch pins in Park, Reverse, Neutral, and Drive. on Honda engines.

Required Tool: Digital Multimeter
04
Replace or Re-align Range Sensor

Loosen mounting bolts, use alignment pin to align sensor slot with transmission shaft in Neutral, torque bolts, or install new OEM sensor. on Honda engines.

Required Tool: 10mm/12mm Sockets, Alignment Pin
05
Clear Trouble Codes and Verify Starting

Clear DTCs and confirm engine starts in Park and Neutral, reverse lights activate, and gear display is accurate. on Honda engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Honda (P0705)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Honda OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Honda.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for HondaVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Honda P0705 Frequently Asked Questions

What does code P0705 mean on a Honda?

On Honda vehicles, P0705 indicates that the Engine Control Module (ECM) detected transmission range sensor circuit malfunction (prndl input). This typically points to Misaligned or faulty Transmission Range Sensor / Neutral Safety Switch (NSS) or Corroded or water-logged connector on transmission side.

Can I continue driving my Honda with code P0705?

Caution. Vehicle may not start in Park, backup lights may not work, and transmission may lock in Limp Mode. Because this code carries a High severity rating on Honda powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0705 on a Honda?

Estimated DIY parts cost ranges from $120 - $450 (DIY: $40 - $160), while professional shop repairs at an authorized Honda dealership or independent specialist typically range from $180 to $380 including diagnostic labor.