MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0140 on Nissan: Symptoms, Causes & Fix

O2 Sensor Circuit No Activity (Bank 1 Sensor 2)

Official technical diagnostic wire for fault code P0140 specifically affecting Nissan vehicles (Altima, Rogue, Sentra, Pathfinder, Frontier).

Sensor Voltage Ref
0.1V – 5.0V Ref
Nissan Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Drivable (Short Trip)
Low urgency level
Est. Repair Cost
$100 - $300 (DIY: $35 - $100)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Nissan Model for P0140:

6 Models Available

1. Common Symptoms on Nissan Vehicles

When Nissan Engine Control Modules (ECM) trigger fault code P0140, drivers typically report:

Check Engine Light on on Nissan Powertrains
Downstream sensor flatlined at static 0.45V bias voltage on Nissan Powertrains
Emissions readiness monitor incomplete on Nissan Powertrains

2. Root Causes on Nissan Engines

Historical diagnostic claims across Nissan engines point to the following failure distribution:

55%
Completely dead downstream O2 sensor (Nissan OEM Part)
25%
Disconnected sensor harness plug under car (Nissan OEM Part)
12%
Cut or broken signal wire in vehicle harness (Nissan OEM Part)
8%
Corroded terminal pins in connector (Nissan OEM Part)

3. Step-by-Step Fix Protocol for Nissan

01
Check Sensor Connection Underbody

Inspect harness connector under vehicle floor pan. Verify plug is firmly seated and weather seal is intact. on Nissan engines.

Required Tool: Flashlight, Jack Stands
02
Test Sensor Heater & Signal Circuit

Check for 12V heater power and ground at connector with ignition ON. on Nissan engines.

Required Tool: Multimeter
03
Replace Downstream Oxygen Sensor

Remove and replace the downstream oxygen sensor with an OEM-spec part. on Nissan engines.

Required Tool: O2 Sensor Socket, Ratchet
04
Clear DTC Codes

Clear code and verify sensor activity returns on live telemetry. on Nissan engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Nissan (P0140)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Nissan OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Nissan.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for NissanVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Nissan P0140 Frequently Asked Questions

What does code P0140 mean on a Nissan?

On Nissan vehicles, P0140 indicates that the Engine Control Module (ECM) detected o2 sensor circuit no activity (bank 1 sensor 2). This typically points to Completely dead downstream O2 sensor or Disconnected sensor harness plug under car.

Can I continue driving my Nissan with code P0140?

Yes, safe for normal driving without risk of breakdown. Because this code carries a Low severity rating on Nissan powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0140 on a Nissan?

Estimated DIY parts cost ranges from $100 - $300 (DIY: $35 - $100), while professional shop repairs at an authorized Nissan dealership or independent specialist typically range from $180 to $380 including diagnostic labor.