P0352 on Subaru: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P0352 specifically affecting Subaru vehicles (Outback, Forester, Crosstrek, WRX, Ascent).
Select Your Subaru Model for P0352:
1. Common Symptoms on Subaru Vehicles
When Subaru Engine Control Modules (ECM) trigger fault code P0352, drivers typically report:
2. Root Causes on Subaru Engines
Historical diagnostic claims across Subaru engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Subaru
Swap Coil 2 with Coil 1. If code becomes P0351, replace coil. on Subaru engines.
Verify 12V power and trigger pulse. on Subaru engines.
Replace Coil B with OEM part. on Subaru engines.
Clear DTCs and confirm zero misfires. on Subaru engines.
Equipment for Diagnosing Subaru (P0352)
Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)
Pre-gapped iridium spark plugs engineered to restore smooth combustion on Subaru.
Magnetic Swivel Spark Plug Socket Set
360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Subaru P0352 Frequently Asked Questions
What does code P0352 mean on a Subaru?
On Subaru vehicles, P0352 indicates that the Engine Control Module (ECM) detected ignition coil b primary/secondary circuit malfunction. This typically points to Dead Cylinder 2 ignition coil or Damaged harness wiring.
Can I continue driving my Subaru with code P0352?
No. Cylinder 2 ignition coil has failed. Because this code carries a Critical severity rating on Subaru powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P0352 on a Subaru?
Estimated DIY parts cost ranges from $100 - $350 (DIY: $30 - $90), while professional shop repairs at an authorized Subaru dealership or independent specialist typically range from $180 to $380 including diagnostic labor.