MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0150 on Acura: Symptoms, Causes & Fix

O2 Sensor Circuit Malfunction (Bank 2 Sensor 1)

Official technical diagnostic wire for fault code P0150 specifically affecting Acura vehicles (MDX, RDX, TLX, Integra, ZDX).

Sensor Voltage Ref
0.1V – 5.0V Ref
Acura Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Drivable (Short Trip)
High urgency level
Est. Repair Cost
$130 - $380 (DIY: $45 - $130)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Acura Model for P0150:

5 Models Available

1. Common Symptoms on Acura Vehicles

When Acura Engine Control Modules (ECM) trigger fault code P0150, drivers typically report:

Check Engine Light illuminated on Acura Powertrains
Increased fuel consumption on V6/V8 engines on Acura Powertrains
Rough idle or slight stumbling during acceleration on Acura Powertrains
Rich or lean exhaust smell on Acura Powertrains

2. Root Causes on Acura Engines

Historical diagnostic claims across Acura engines point to the following failure distribution:

55%
Failing Bank 2 upstream oxygen sensor (Acura OEM Part)
25%
Damaged wiring or melted harness on Bank 2 exhaust manifold (Acura OEM Part)
12%
Exhaust manifold gasket leak on Bank 2 (Acura OEM Part)
8%
Blown O2 sensor heater circuit fuse (Acura OEM Part)

3. Step-by-Step Fix Protocol for Acura

01
Locate Bank 2 Upstream Sensor

Identify Bank 2 (the cylinder bank that does NOT contain Cylinder 1). Locate the upstream O2 sensor before the catalytic converter. on Acura engines.

Required Tool: Engine Bay Inspection Light
02
Inspect Wiring & Measure Heater Resistance

Check the 4-wire or 5-wire harness for damage. Measure heater resistance across pins (typically 4–15 ohms). on Acura engines.

Required Tool: Digital Multimeter
03
Replace Bank 2 Sensor 1

Use an O2 sensor socket to remove the old sensor, thread in new OEM replacement, and torque securely. on Acura engines.

Required Tool: 7/8 O2 Sensor Socket, Ratchet, Penetrating Oil
04
Clear Trouble Codes & Test Drive

Clear DTCs and monitor Bank 2 Short Term Fuel Trim (STFT) to verify fuel control restoration. on Acura engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Acura (P0150)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Acura OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Acura.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for AcuraVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Acura P0150 Frequently Asked Questions

What does code P0150 mean on a Acura?

On Acura vehicles, P0150 indicates that the Engine Control Module (ECM) detected o2 sensor circuit malfunction (bank 2 sensor 1). This typically points to Failing Bank 2 upstream oxygen sensor or Damaged wiring or melted harness on Bank 2 exhaust manifold.

Can I continue driving my Acura with code P0150?

Yes, for limited driving. Bank 2 cylinders will operate in open-loop fail-safe mode. Because this code carries a High severity rating on Acura powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0150 on a Acura?

Estimated DIY parts cost ranges from $130 - $380 (DIY: $45 - $130), while professional shop repairs at an authorized Acura dealership or independent specialist typically range from $180 to $380 including diagnostic labor.