MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0117 on Chrysler: Symptoms, Causes & Fix

Engine Coolant Temperature Sensor 1 Circuit Low

Official technical diagnostic wire for fault code P0117 specifically affecting Chrysler vehicles (Pacifica, Pacifica Hybrid, 300, Voyager).

Sensor Voltage Ref
0.1V – 5.0V Ref
Chrysler Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Not Recommended
High urgency level
Est. Repair Cost
$80 - $250 (DIY: $20 - $60)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Chrysler Model for P0117:

4 Models Available

1. Common Symptoms on Chrysler Vehicles

When Chrysler Engine Control Modules (ECM) trigger fault code P0117, drivers typically report:

Check Engine Light on on Chrysler Powertrains
Radiator radiator fans running constantly at high speed on Chrysler Powertrains
Temperature gauge pegged at maximum H or not reading on Chrysler Powertrains
Engine hard starting when cold (flooding from excess fuel) on Chrysler Powertrains
Poor gas mileage and rough idling on Chrysler Powertrains

2. Root Causes on Chrysler Engines

Historical diagnostic claims across Chrysler engines point to the following failure distribution:

55%
ECT sensor internal short to ground (Chrysler OEM Part)
25%
Short circuit to ground in ECT signal wiring harness (Chrysler OEM Part)
12%
Damaged, corroded, or water-contaminated ECT connector (Chrysler OEM Part)
8%
Faulty PCM / ECM analog input circuit (Chrysler OEM Part)

3. Step-by-Step Fix Protocol for Chrysler

01
Scan ECT Temperature Data

Read ECT live PID on scanner. If it reads 284°F (140°C) or higher with engine cold, a short to ground exists. on Chrysler engines.

Required Tool: OBD-II Scanner
02
Unplug ECT Sensor Connector

Unplug sensor connector while watching live data. If temperature drops to -40°F (-40°C), the sensor itself is shorted. on Chrysler engines.

Required Tool: OBD-II Scanner
03
Inspect Wiring Harness

If reading stays pegged at max with sensor unplugged, inspect harness for pinch points grounding against engine block. on Chrysler engines.

Required Tool: Digital Multimeter
04
Replace Engine Coolant Temperature Sensor

Allow engine to cool, unscrew old ECT sensor from coolant crossover pipe or thermostat housing, install new OEM sensor with fresh thread sealant. on Chrysler engines.

Required Tool: 19mm Deep Socket, Ratchet, Coolant Catch Pan
05
Top off Coolant & Clear Codes

Bleed air from cooling system, clear DTCs, and verify normal temperature rise on live data. on Chrysler engines.

Required Tool: Coolant Funnel Kit, OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Chrysler (P0117)

Prime Fast Delivery & Verified Fitment
Variable Valve Timing (VVT)

VVT Oil Control Solenoid Valve

4.6 / 5.0 (Direct Fit)

Restores accurate camshaft timing and oil pressure regulation on Chrysler.

$34 – $65 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for ChryslerVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Chrysler P0117 Frequently Asked Questions

What does code P0117 mean on a Chrysler?

On Chrysler vehicles, P0117 indicates that the Engine Control Module (ECM) detected engine coolant temperature sensor 1 circuit low. This typically points to ECT sensor internal short to ground or Short circuit to ground in ECT signal wiring harness.

Can I continue driving my Chrysler with code P0117?

No. The ECU thinks the engine is at 280°F+ (overheating) and runs rich or disables cooling fan logic. Because this code carries a High severity rating on Chrysler powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0117 on a Chrysler?

Estimated DIY parts cost ranges from $80 - $250 (DIY: $20 - $60), while professional shop repairs at an authorized Chrysler dealership or independent specialist typically range from $180 to $380 including diagnostic labor.