MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0351 on Dodge: Symptoms, Causes & Fix

Ignition Coil A Primary/Secondary Circuit Malfunction

Official technical diagnostic wire for fault code P0351 specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet, Journey).

Sensor Voltage Ref
0.1V – 5.0V Ref
Dodge Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Not Recommended
Critical urgency level
Est. Repair Cost
$100 - $350 (DIY: $30 - $90)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Dodge Model for P0351:

4 Models Available

1. Common Symptoms on Dodge Vehicles

When Dodge Engine Control Modules (ECM) trigger fault code P0351, drivers typically report:

Flashing Check Engine Light on Dodge Powertrains
Severe engine shuddering and jerking under acceleration on Dodge Powertrains
Hard misfire on Cylinder 1 (accompanied by P0301) on Dodge Powertrains
Strong smell of unburned gasoline from exhaust on Dodge Powertrains

2. Root Causes on Dodge Engines

Historical diagnostic claims across Dodge engines point to the following failure distribution:

55%
Failed ignition coil pack on Cylinder 1 (Coil A) (Dodge OEM Part)
25%
Broken or melted wiring harness to ignition coil 1 (Dodge OEM Part)
12%
Corroded or broken terminal pins in coil electrical connector (Dodge OEM Part)
8%
Burned ignition driver transistor (IGBT) inside the ECM/PCM (Dodge OEM Part)

3. Step-by-Step Fix Protocol for Dodge

01
Locate Coil A (Cylinder 1 Ignition Coil)

Identify Cylinder 1 ignition coil pack mounted on the valve cover. on Dodge engines.

Required Tool: Flashlight
02
Perform Coil Swap Test

Swap Coil 1 with Coil 2. Clear codes and restart engine. If code switches to P0352 (Coil B), the ignition coil is 100% defective. on Dodge engines.

Required Tool: 10mm Socket, Ratchet, OBD-II Scanner
03
Test Wiring Harness if Code Remains P0351

Check for 12V battery power, chassis ground, and 5V trigger pulse from the PCM on the 3-pin / 4-pin harness plug. on Dodge engines.

Required Tool: Digital Multimeter, Test Light
04
Replace Ignition Coil & Spark Plug

Install a new OEM ignition coil (e.g. Denso, Motorcraft, Delphi) and replace the spark plug on Cylinder 1. on Dodge engines.

Required Tool: 5/8 Spark Plug Socket, 10mm Socket, Ratchet
05
Clear Trouble Codes and Road Test

Clear DTCs and verify smooth acceleration under load. on Dodge engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Dodge (P0351)

Prime Fast Delivery & Verified Fitment
OEM Ignition Component

Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)

4.8 / 5.0 (Top Rated)

Pre-gapped iridium spark plugs engineered to restore smooth combustion on Dodge.

$36 – $68 Prime
Check Price on Amazon
Ignition Service Tool

Magnetic Swivel Spark Plug Socket Set

4.8 / 5.0 (Amazon Choice)

360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.

$16.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for DodgeVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Dodge P0351 Frequently Asked Questions

What does code P0351 mean on a Dodge?

On Dodge vehicles, P0351 indicates that the Engine Control Module (ECM) detected ignition coil a primary/secondary circuit malfunction. This typically points to Failed ignition coil pack on Cylinder 1 (Coil A) or Broken or melted wiring harness to ignition coil 1.

Can I continue driving my Dodge with code P0351?

No. Cylinder 1 ignition coil has failed completely, causing an active misfire and dumping unburned fuel into the catalytic converter. Because this code carries a Critical severity rating on Dodge powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0351 on a Dodge?

Estimated DIY parts cost ranges from $100 - $350 (DIY: $30 - $90), while professional shop repairs at an authorized Dodge dealership or independent specialist typically range from $180 to $380 including diagnostic labor.