MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

C1288 on Cadillac XT5

Brake Pressure Transducer Primary Input Circuit Failure

Factory diagnostic protocol and troubleshooting wire for fault code C1288 specifically for the Cadillac XT5 (2020–2026, 2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP)).

Verified OEM Telemetry & Field Repair Tree
Cadillac XT52020–2026
Cadillac XT5
SUV2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP)
Reliability
Sensor Voltage Ref
0.1V – 5.0V Ref
XT5 SAE Mode $01
ECU Network Bus
500 kbps CAN-FD
ISO 15765-4 Compliant
Drivability Status
Not Recommended
High urgency level
Est. Repair Cost
$350 - $1,200 (DIY: $150 - $400)
Parts & Labor DIY
Check C1288 On Another Cadillac Model:
Diagnose C1288 on Specific XT5 Model Year:

1. Symptoms of C1288 on Cadillac XT5

When the Engine Control Module (ECM/PCM) on your Cadillac XT5 (2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP)) logs fault code C1288, drivers commonly observe:

ABS and AdvanceTrac warning lights on on Cadillac XT5 (2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP))
Brake warning chime on startup on Cadillac XT5 (2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP))
No ABS anti-lock function during hard panic stops on Cadillac XT5 (2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP))
Cadillac XT5 OBD-II Port Location
The 16-pin diagnostic connector is located Driver side lower dash assembly. Plug in your scan tool to verify freeze-frame sensor values.

2. Most Likely Causes on Cadillac XT5

Historical warranty claims and technical repair bulletins for Cadillac XT5 point to the following failure distribution:

55%
Failed internal brake pressure transducer inside the ABS Hydraulic Control Unit (HCU) (Cadillac OEM Part)
25%
Corroded pins in ABS module electrical connector (Cadillac OEM Part)
12%
Low brake fluid level or contaminated brake fluid with moisture (Cadillac OEM Part)
* Source: Synthesized from NHTSA ODI field repair telemetry and verified OEM Technical Service Bulletin (TSB) repair tree frequency percentiles for Cadillac XT5.

3. Step-by-Step DIY Repair Guide for Cadillac XT5

01
Check Brake Pressure Live Data

Monitor brake pressure transducer PID. It should read near 0 bar unpressed and climb smoothly to 80+ bar when pressing pedal. on the Cadillac XT5 equipped with 2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP).

Required Tool: ABS Capable Scan Tool
02
Inspect ABS Module Harness

Unplug ABS connector and check for bent pins or brake fluid contamination. on the Cadillac XT5 equipped with 2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP).

Required Tool: Flashlight
03
Replace/Rebuild ABS Hydraulic Control Unit (HCU)

Replace the ABS HCU / pump assembly or send unit to a certified rebuilder to replace the internal pressure transducer. on the Cadillac XT5 equipped with 2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP).

Required Tool: Line Wrenches, Bleeder Kit, Socket Set
04
Perform Automated ABS Brake Bleed

Run scan tool automated bleed procedure to purge air from ABS valves, then bleed all 4 calipers. on the Cadillac XT5 equipped with 2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP).

Required Tool: Scan Tool with Automated Bleed, Brake Fluid
05
Clear ABS Codes

Clear DTCs and road test to verify AdvanceTrac operation. on the Cadillac XT5 equipped with 2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP).

Required Tool: Scan Tool
Recommended Parts & Testing Tools

Equipment for Diagnosing Cadillac XT5 (C1288)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Cadillac XT5 OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Cadillac XT5.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for Cadillac XT5Verified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

Other Common Fault Codes on Cadillac XT5

Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Cadillac XT5:

4. Cadillac XT5 C1288 FAQs

What causes code C1288 to trigger on a Cadillac XT5?

On the Cadillac XT5 (2.0L Turbo 4-Cyl (237HP) / 3.6L V6 (LGX 310HP)), C1288 is most frequently caused by Failed internal brake pressure transducer inside the ABS Hydraulic Control Unit (HCU) or Corroded pins in ABS module electrical connector.

Where is the OBD-II port located on my Cadillac XT5?

On the Cadillac XT5, the 16-pin DLC diagnostic connector is located Driver side lower dash assembly. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.

Can I safely drive my Cadillac XT5 with code C1288?

Caution. Normal hydraulic brakes work, but ABS, Traction Control, and AdvanceTrac are disabled. Given that C1288 carries a High severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.