P0453 on 2020 Chrysler Pacifica Hybrid
Technical troubleshooting wire for fault code P0453 specifically tailored for the 2020 Chrysler Pacifica Hybrid. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2020 Pacifica Hybrid Symptoms
- Check Engine Light on
- Failed emissions test
Likely Root Causes on 2020 Pacifica Hybrid
- Open ground wire on FTP sensor
- Signal shorted to 5V reference
- Defective fuel tank pressure sensor
Step-by-Step Fix Protocol for 2020 Chrysler Pacifica Hybrid
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0453 set.
Inspect the sensor connector on the 2020 Pacifica Hybrid engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0453 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2020 Chrysler Pacifica Hybrid (P0453)
OEM Tethered Fuel Gas Cap with O-Ring
Tight-sealing factory fuel cap resolves common EVAP small/large leak codes without workshop visits.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.