P0402 on 2020 Dodge Charger
Technical troubleshooting wire for fault code P0402 specifically tailored for the 2020 Dodge Charger. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2020 Charger Symptoms
- Engine stalls when slowing down or idling
- Rough stumbling idle
- Check Engine Light on
Likely Root Causes on 2020 Charger
- EGR valve stuck permanently open with carbon
- Faulty EGR vacuum solenoid
- Defective DPFE sensor
Step-by-Step Fix Protocol for 2020 Dodge Charger
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0402 set.
Inspect the sensor connector on the 2020 Charger engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0402 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2020 Dodge Charger (P0402)
2020 Dodge Charger OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for 2020 Dodge Charger.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.