P0204 on Lexus RX
Factory diagnostic protocol and troubleshooting wire for fault code P0204 specifically for the Lexus RX (2020–2026, 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)).
1. Symptoms of P0204 on Lexus RX
When the Engine Control Module (ECM/PCM) on your Lexus RX (2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)) logs fault code P0204, drivers commonly observe:
2. Most Likely Causes on Lexus RX
Historical warranty claims and technical repair bulletins for Lexus RX point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Lexus RX
Measure resistance across pins (12–16 ohms). on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Check that ECM pulse reaches the connector. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Replace the faulty injector with OEM unit. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Clear DTC memory and confirm smooth operation. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Equipment for Diagnosing Lexus RX (P0204)
Lexus RX OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Lexus RX.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Lexus RX
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Lexus RX:
4. Lexus RX P0204 FAQs
What causes code P0204 to trigger on a Lexus RX?
On the Lexus RX (2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)), P0204 is most frequently caused by Faulty Cylinder 4 fuel injector or Broken wiring harness.
Where is the OBD-II port located on my Lexus RX?
On the Lexus RX, the 16-pin DLC diagnostic connector is located Driver footwell above brake pedal assembly. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Lexus RX with code P0204?
No. Cylinder 4 is disabled, causing rough running and unburned fuel delivery issues. Given that P0204 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.