MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0316 on Lincoln Aviator

Engine Misfire Detected on Startup (First 1000 Revolutions)

Factory diagnostic protocol and troubleshooting wire for fault code P0316 specifically for the Lincoln Aviator (2020–2026, 3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP)).

Verified OEM Telemetry & Field Repair Tree
Lincoln Aviator2020–2026
Lincoln Aviator
SUV3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP)
Reliability
Sensor Voltage Ref
0.1V – 5.0V Ref
Aviator SAE Mode $01
ECU Network Bus
500 kbps CAN-FD
ISO 15765-4 Compliant
Drivability Status
Drivable (Short Trip)
High urgency level
Est. Repair Cost
$100 - $600 (DIY: $30 - $150)
Parts & Labor DIY
Check P0316 On Another Lincoln Model:
Diagnose P0316 on Specific Aviator Model Year:

1. Symptoms of P0316 on Lincoln Aviator

When the Engine Control Module (ECM/PCM) on your Lincoln Aviator (3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP)) logs fault code P0316, drivers commonly observe:

Check Engine Light on on Lincoln Aviator (3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP))
Engine shakes, sputters, and runs very rough immediately after cold start on Lincoln Aviator (3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP))
Engine smooths out and runs normally after warming up for 1–2 minutes on Lincoln Aviator (3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP))
Accompanying misfire codes (P0300, P0301-P0308) on Lincoln Aviator (3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP))
Lincoln Aviator OBD-II Port Location
The 16-pin diagnostic connector is located Driver lower kick panel near door release assembly. Plug in your scan tool to verify freeze-frame sensor values.

2. Most Likely Causes on Lincoln Aviator

Historical warranty claims and technical repair bulletins for Lincoln Aviator point to the following failure distribution:

55%
Coolant leaking into cylinder overnight from failing head gasket or intake manifold (Lincoln OEM Part)
25%
Leaking fuel injector dripping fuel into cylinder while parked (Lincoln OEM Part)
12%
Worn spark plugs with excessive gap or moisture on ignition boots (Lincoln OEM Part)
8%
Carbon buildup on intake valves preventing cold fuel vaporization (Lincoln OEM Part)
* Source: Synthesized from NHTSA ODI field repair telemetry and verified OEM Technical Service Bulletin (TSB) repair tree frequency percentiles for Lincoln Aviator.

3. Step-by-Step DIY Repair Guide for Lincoln Aviator

01
Check Accompanying Cylinder Misfire Code

Check if P0316 is accompanied by a specific cylinder code (like P0303) to isolate which cylinder is misfiring on startup. on the Lincoln Aviator equipped with 3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP).

Required Tool: OBD-II Scanner
02
Perform Cooling System Pressure Test

Pressurize cold cooling system to 15 PSI. Use a borescope camera through spark plug hole to check for coolant pool on piston top. on the Lincoln Aviator equipped with 3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP).

Required Tool: Cooling System Pressure Tester, Borescope Camera
03
Inspect Spark Plugs and Coils

Remove spark plugs. Check for white coolant crust, fuel fouling, or cracked ceramic insulators. on the Lincoln Aviator equipped with 3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP).

Required Tool: Spark Plug Socket, Ratchet
04
Perform Intake Valve Carbon Cleaning

On direct-injection engines, perform walnut shell blasting or chemical intake valve cleaning to remove cold carbon buildup. on the Lincoln Aviator equipped with 3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP).

Required Tool: Intake Valve Cleaner Kit
05
Clear Trouble Codes and Test Overnight Cold Start

Clear DTCs and allow vehicle to sit overnight to confirm morning start is clean. on the Lincoln Aviator equipped with 3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP).

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Lincoln Aviator (P0316)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Lincoln Aviator OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Lincoln Aviator.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for Lincoln AviatorVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

Other Common Fault Codes on Lincoln Aviator

Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Lincoln Aviator:

4. Lincoln Aviator P0316 FAQs

What causes code P0316 to trigger on a Lincoln Aviator?

On the Lincoln Aviator (3.0L Twin-Turbo EcoBoost V6 (400HP) / Grand Touring PHEV (494HP)), P0316 is most frequently caused by Coolant leaking into cylinder overnight from failing head gasket or intake manifold or Leaking fuel injector dripping fuel into cylinder while parked.

Where is the OBD-II port located on my Lincoln Aviator?

On the Lincoln Aviator, the 16-pin DLC diagnostic connector is located Driver lower kick panel near door release assembly. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.

Can I safely drive my Lincoln Aviator with code P0316?

Caution. Engine misfires heavily for the first 30–60 seconds after starting, then smooths out. Given that P0316 carries a High severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.