P0352 on Mazda CX-90
Factory diagnostic protocol and troubleshooting wire for fault code P0352 specifically for the Mazda CX-90 (2024–2026, 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV).
1. Symptoms of P0352 on Mazda CX-90
When the Engine Control Module (ECM/PCM) on your Mazda CX-90 (3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV) logs fault code P0352, drivers commonly observe:
2. Most Likely Causes on Mazda CX-90
Historical warranty claims and technical repair bulletins for Mazda CX-90 point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Mazda CX-90
Swap Coil 2 with Coil 1. If code becomes P0351, replace coil. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Verify 12V power and trigger pulse. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Replace Coil B with OEM part. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Clear DTCs and confirm zero misfires. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Equipment for Diagnosing Mazda CX-90 (P0352)
Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)
Pre-gapped iridium spark plugs engineered to restore smooth combustion on Mazda CX-90.
Magnetic Swivel Spark Plug Socket Set
360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Mazda CX-90
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Mazda CX-90:
4. Mazda CX-90 P0352 FAQs
What causes code P0352 to trigger on a Mazda CX-90?
On the Mazda CX-90 (3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV), P0352 is most frequently caused by Dead Cylinder 2 ignition coil or Damaged harness wiring.
Where is the OBD-II port located on my Mazda CX-90?
On the Mazda CX-90, the 16-pin DLC diagnostic connector is located Under driver lower dash trim above pedal cluster. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Mazda CX-90 with code P0352?
No. Cylinder 2 ignition coil has failed. Given that P0352 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.