P0354 on Mercedes-Benz G-Class
Factory diagnostic protocol and troubleshooting wire for fault code P0354 specifically for the Mercedes-Benz G-Class (2020–2026, 4.0L Bi-Turbo V8 (M177 AMG G 63 577HP) / 3.0L I6 Mild Hybrid G 550).
1. Symptoms of P0354 on Mercedes-Benz G-Class
When the Engine Control Module (ECM/PCM) on your Mercedes-Benz G-Class (4.0L Bi-Turbo V8 (M177 AMG G 63 577HP) / 3.0L I6 Mild Hybrid G 550) logs fault code P0354, drivers commonly observe:
2. Most Likely Causes on Mercedes-Benz G-Class
Historical warranty claims and technical repair bulletins for Mercedes-Benz G-Class point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Mercedes-Benz G-Class
Swap Coil 4 to Cylinder 1. on the Mercedes-Benz G-Class equipped with 4.0L Bi-Turbo V8 (M177 AMG G 63 577HP) / 3.0L I6 Mild Hybrid G 550.
Install new OEM coil pack. on the Mercedes-Benz G-Class equipped with 4.0L Bi-Turbo V8 (M177 AMG G 63 577HP) / 3.0L I6 Mild Hybrid G 550.
Clear memory and road test. on the Mercedes-Benz G-Class equipped with 4.0L Bi-Turbo V8 (M177 AMG G 63 577HP) / 3.0L I6 Mild Hybrid G 550.
Equipment for Diagnosing Mercedes-Benz G-Class (P0354)
Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)
Pre-gapped iridium spark plugs engineered to restore smooth combustion on Mercedes-Benz G-Class.
Magnetic Swivel Spark Plug Socket Set
360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Mercedes-Benz G-Class
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Mercedes-Benz G-Class:
4. Mercedes-Benz G-Class P0354 FAQs
What causes code P0354 to trigger on a Mercedes-Benz G-Class?
On the Mercedes-Benz G-Class (4.0L Bi-Turbo V8 (M177 AMG G 63 577HP) / 3.0L I6 Mild Hybrid G 550), P0354 is most frequently caused by Dead Cylinder 4 ignition coil or Wiring damage.
Where is the OBD-II port located on my Mercedes-Benz G-Class?
On the Mercedes-Benz G-Class, the 16-pin DLC diagnostic connector is located Driver side lower knee panel behind OBD door. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Mercedes-Benz G-Class with code P0354?
No. Cylinder 4 ignition coil has failed. Given that P0354 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.