P0352 on Mercedes-Benz GLC
Factory diagnostic protocol and troubleshooting wire for fault code P0352 specifically for the Mercedes-Benz GLC (2020–2026, 2.0L Turbo 4-Cyl with EQ Boost (255HP) / AMG GLC 43 4MATIC).
1. Symptoms of P0352 on Mercedes-Benz GLC
When the Engine Control Module (ECM/PCM) on your Mercedes-Benz GLC (2.0L Turbo 4-Cyl with EQ Boost (255HP) / AMG GLC 43 4MATIC) logs fault code P0352, drivers commonly observe:
2. Most Likely Causes on Mercedes-Benz GLC
Historical warranty claims and technical repair bulletins for Mercedes-Benz GLC point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Mercedes-Benz GLC
Swap Coil 2 with Coil 1. If code becomes P0351, replace coil. on the Mercedes-Benz GLC equipped with 2.0L Turbo 4-Cyl with EQ Boost (255HP) / AMG GLC 43 4MATIC.
Verify 12V power and trigger pulse. on the Mercedes-Benz GLC equipped with 2.0L Turbo 4-Cyl with EQ Boost (255HP) / AMG GLC 43 4MATIC.
Replace Coil B with OEM part. on the Mercedes-Benz GLC equipped with 2.0L Turbo 4-Cyl with EQ Boost (255HP) / AMG GLC 43 4MATIC.
Clear DTCs and confirm zero misfires. on the Mercedes-Benz GLC equipped with 2.0L Turbo 4-Cyl with EQ Boost (255HP) / AMG GLC 43 4MATIC.
Equipment for Diagnosing Mercedes-Benz GLC (P0352)
Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)
Pre-gapped iridium spark plugs engineered to restore smooth combustion on Mercedes-Benz GLC.
Magnetic Swivel Spark Plug Socket Set
360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Mercedes-Benz GLC
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Mercedes-Benz GLC:
4. Mercedes-Benz GLC P0352 FAQs
What causes code P0352 to trigger on a Mercedes-Benz GLC?
On the Mercedes-Benz GLC (2.0L Turbo 4-Cyl with EQ Boost (255HP) / AMG GLC 43 4MATIC), P0352 is most frequently caused by Dead Cylinder 2 ignition coil or Damaged harness wiring.
Where is the OBD-II port located on my Mercedes-Benz GLC?
On the Mercedes-Benz GLC, the 16-pin DLC diagnostic connector is located Driver lower kick panel near hood release lever. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Mercedes-Benz GLC with code P0352?
No. Cylinder 2 ignition coil has failed. Given that P0352 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.