B1318 on 2019 RAM 1500 TRX
Technical troubleshooting wire for fault code B1318 specifically tailored for the 2019 RAM 1500 TRX. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2019 1500 TRX Symptoms
- Battery warning light on dash
- Slow engine cranking or rapid clicking starter
- Random electrical accessories (radio, power windows) shutting off
- Multiple U-codes and B-codes stored simultaneously
Likely Root Causes on 2019 1500 TRX
- Failing 12V automotive battery (sulfated plates or dead cell)
- Faulty alternator not charging battery (>13.5V)
- Corroded or loose battery cable terminals
- Parasitic battery drain drawing power while parked
Step-by-Step Fix Protocol for 2019 RAM 1500 TRX
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment B1318 set.
Inspect the sensor connector on the 2019 1500 TRX engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC B1318 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2019 RAM 1500 TRX (B1318)
2019 RAM 1500 TRX OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for 2019 RAM 1500 TRX.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.