P0204 on Toyota Grand Highlander
Factory diagnostic protocol and troubleshooting wire for fault code P0204 specifically for the Toyota Grand Highlander (2024–2026, 2.4L Turbo / 2.5L Hybrid / Hybrid MAX 362HP Turbo AWD).
1. Symptoms of P0204 on Toyota Grand Highlander
When the Engine Control Module (ECM/PCM) on your Toyota Grand Highlander (2.4L Turbo / 2.5L Hybrid / Hybrid MAX 362HP Turbo AWD) logs fault code P0204, drivers commonly observe:
2. Most Likely Causes on Toyota Grand Highlander
Historical warranty claims and technical repair bulletins for Toyota Grand Highlander point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Toyota Grand Highlander
Measure resistance across pins (12–16 ohms). on the Toyota Grand Highlander equipped with 2.4L Turbo / 2.5L Hybrid / Hybrid MAX 362HP Turbo AWD.
Check that ECM pulse reaches the connector. on the Toyota Grand Highlander equipped with 2.4L Turbo / 2.5L Hybrid / Hybrid MAX 362HP Turbo AWD.
Replace the faulty injector with OEM unit. on the Toyota Grand Highlander equipped with 2.4L Turbo / 2.5L Hybrid / Hybrid MAX 362HP Turbo AWD.
Clear DTC memory and confirm smooth operation. on the Toyota Grand Highlander equipped with 2.4L Turbo / 2.5L Hybrid / Hybrid MAX 362HP Turbo AWD.
Equipment for Diagnosing Toyota Grand Highlander (P0204)
Toyota Grand Highlander OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Toyota Grand Highlander.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Toyota Grand Highlander
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Toyota Grand Highlander:
4. Toyota Grand Highlander P0204 FAQs
What causes code P0204 to trigger on a Toyota Grand Highlander?
On the Toyota Grand Highlander (2.4L Turbo / 2.5L Hybrid / Hybrid MAX 362HP Turbo AWD), P0204 is most frequently caused by Faulty Cylinder 4 fuel injector or Broken wiring harness.
Where is the OBD-II port located on my Toyota Grand Highlander?
On the Toyota Grand Highlander, the 16-pin DLC diagnostic connector is located Driver side lower knee panel above dead pedal. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Toyota Grand Highlander with code P0204?
No. Cylinder 4 is disabled, causing rough running and unburned fuel delivery issues. Given that P0204 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.