P0352 on Toyota Tacoma
Factory diagnostic protocol and troubleshooting wire for fault code P0352 specifically for the Toyota Tacoma (2020–2026, 2.4L i-FORCE Turbo (278HP) / i-FORCE MAX Hybrid (326HP) / 3.5L V6).
1. Symptoms of P0352 on Toyota Tacoma
When the Engine Control Module (ECM/PCM) on your Toyota Tacoma (2.4L i-FORCE Turbo (278HP) / i-FORCE MAX Hybrid (326HP) / 3.5L V6) logs fault code P0352, drivers commonly observe:
2. Most Likely Causes on Toyota Tacoma
Historical warranty claims and technical repair bulletins for Toyota Tacoma point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Toyota Tacoma
Swap Coil 2 with Coil 1. If code becomes P0351, replace coil. on the Toyota Tacoma equipped with 2.4L i-FORCE Turbo (278HP) / i-FORCE MAX Hybrid (326HP) / 3.5L V6.
Verify 12V power and trigger pulse. on the Toyota Tacoma equipped with 2.4L i-FORCE Turbo (278HP) / i-FORCE MAX Hybrid (326HP) / 3.5L V6.
Replace Coil B with OEM part. on the Toyota Tacoma equipped with 2.4L i-FORCE Turbo (278HP) / i-FORCE MAX Hybrid (326HP) / 3.5L V6.
Clear DTCs and confirm zero misfires. on the Toyota Tacoma equipped with 2.4L i-FORCE Turbo (278HP) / i-FORCE MAX Hybrid (326HP) / 3.5L V6.
Equipment for Diagnosing Toyota Tacoma (P0352)
Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)
Pre-gapped iridium spark plugs engineered to restore smooth combustion on Toyota Tacoma.
Magnetic Swivel Spark Plug Socket Set
360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Toyota Tacoma
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Toyota Tacoma:
4. Toyota Tacoma P0352 FAQs
What causes code P0352 to trigger on a Toyota Tacoma?
On the Toyota Tacoma (2.4L i-FORCE Turbo (278HP) / i-FORCE MAX Hybrid (326HP) / 3.5L V6), P0352 is most frequently caused by Dead Cylinder 2 ignition coil or Damaged harness wiring.
Where is the OBD-II port located on my Toyota Tacoma?
On the Toyota Tacoma, the 16-pin DLC diagnostic connector is located Left kick panel beneath dashboard trim. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Toyota Tacoma with code P0352?
No. Cylinder 2 ignition coil has failed. Given that P0352 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.