P0744 on 2019 Volvo XC60
Technical troubleshooting wire for fault code P0744 specifically tailored for the 2019 Volvo XC60. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2019 XC60 Symptoms
- Check Engine Light on
- RPM fluctuates on highway
- Slight shudder during lockup
Likely Root Causes on 2019 XC60
- Intermittent TCC solenoid failure
- Contaminated transmission fluid
- Worn torque converter seal
Step-by-Step Fix Protocol for 2019 Volvo XC60
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0744 set.
Inspect the sensor connector on the 2019 XC60 engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0744 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2019 Volvo XC60 (P0744)
2019 Volvo XC60 OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for 2019 Volvo XC60.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.