P0352 on BMW 3 Series
Factory diagnostic protocol and troubleshooting wire for fault code P0352 specifically for the BMW 3 Series (2020–2026, 2.0L TwinPower Turbo 4-Cyl (B48 255HP) / 3.0L Turbo I6 (B58 382HP)).
1. Symptoms of P0352 on BMW 3 Series
When the Engine Control Module (ECM/PCM) on your BMW 3 Series (2.0L TwinPower Turbo 4-Cyl (B48 255HP) / 3.0L Turbo I6 (B58 382HP)) logs fault code P0352, drivers commonly observe:
2. Most Likely Causes on BMW 3 Series
Historical warranty claims and technical repair bulletins for BMW 3 Series point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for BMW 3 Series
Swap Coil 2 with Coil 1. If code becomes P0351, replace coil. on the BMW 3 Series equipped with 2.0L TwinPower Turbo 4-Cyl (B48 255HP) / 3.0L Turbo I6 (B58 382HP).
Verify 12V power and trigger pulse. on the BMW 3 Series equipped with 2.0L TwinPower Turbo 4-Cyl (B48 255HP) / 3.0L Turbo I6 (B58 382HP).
Replace Coil B with OEM part. on the BMW 3 Series equipped with 2.0L TwinPower Turbo 4-Cyl (B48 255HP) / 3.0L Turbo I6 (B58 382HP).
Clear DTCs and confirm zero misfires. on the BMW 3 Series equipped with 2.0L TwinPower Turbo 4-Cyl (B48 255HP) / 3.0L Turbo I6 (B58 382HP).
Equipment for Diagnosing BMW 3 Series (P0352)
Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)
Pre-gapped iridium spark plugs engineered to restore smooth combustion on BMW 3 Series.
Magnetic Swivel Spark Plug Socket Set
360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on BMW 3 Series
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the BMW 3 Series:
4. BMW 3 Series P0352 FAQs
What causes code P0352 to trigger on a BMW 3 Series?
On the BMW 3 Series (2.0L TwinPower Turbo 4-Cyl (B48 255HP) / 3.0L Turbo I6 (B58 382HP)), P0352 is most frequently caused by Dead Cylinder 2 ignition coil or Damaged harness wiring.
Where is the OBD-II port located on my BMW 3 Series?
On the BMW 3 Series, the 16-pin DLC diagnostic connector is located Behind fold-down trap door in driver footwell (A-pillar base). Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my BMW 3 Series with code P0352?
No. Cylinder 2 ignition coil has failed. Given that P0352 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.