P0352 on BMW X5
Factory diagnostic protocol and troubleshooting wire for fault code P0352 specifically for the BMW X5 (2020–2026, 3.0L Turbo I6 (375HP) / 4.4L V8 M60i / xDrive50e PHEV (483HP)).
1. Symptoms of P0352 on BMW X5
When the Engine Control Module (ECM/PCM) on your BMW X5 (3.0L Turbo I6 (375HP) / 4.4L V8 M60i / xDrive50e PHEV (483HP)) logs fault code P0352, drivers commonly observe:
2. Most Likely Causes on BMW X5
Historical warranty claims and technical repair bulletins for BMW X5 point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for BMW X5
Swap Coil 2 with Coil 1. If code becomes P0351, replace coil. on the BMW X5 equipped with 3.0L Turbo I6 (375HP) / 4.4L V8 M60i / xDrive50e PHEV (483HP).
Verify 12V power and trigger pulse. on the BMW X5 equipped with 3.0L Turbo I6 (375HP) / 4.4L V8 M60i / xDrive50e PHEV (483HP).
Replace Coil B with OEM part. on the BMW X5 equipped with 3.0L Turbo I6 (375HP) / 4.4L V8 M60i / xDrive50e PHEV (483HP).
Clear DTCs and confirm zero misfires. on the BMW X5 equipped with 3.0L Turbo I6 (375HP) / 4.4L V8 M60i / xDrive50e PHEV (483HP).
Equipment for Diagnosing BMW X5 (P0352)
Direct-Fit Laser Iridium Spark Plugs (Set of 4/6)
Pre-gapped iridium spark plugs engineered to restore smooth combustion on BMW X5.
Magnetic Swivel Spark Plug Socket Set
360-degree magnetic swivel socket prevents ceramic plug cracks inside deep engine spark wells.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on BMW X5
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the BMW X5:
4. BMW X5 P0352 FAQs
What causes code P0352 to trigger on a BMW X5?
On the BMW X5 (3.0L Turbo I6 (375HP) / 4.4L V8 M60i / xDrive50e PHEV (483HP)), P0352 is most frequently caused by Dead Cylinder 2 ignition coil or Damaged harness wiring.
Where is the OBD-II port located on my BMW X5?
On the BMW X5, the 16-pin DLC diagnostic connector is located Driver footwell beside brake pedal behind access door. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my BMW X5 with code P0352?
No. Cylinder 2 ignition coil has failed. Given that P0352 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.