MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0316 on Chevrolet Colorado

Engine Misfire Detected on Startup (First 1000 Revolutions)

Factory diagnostic protocol and troubleshooting wire for fault code P0316 specifically for the Chevrolet Colorado (2021–2026, 2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road).

Verified OEM Telemetry & Field Repair Tree
Chevrolet Colorado2021–2026
Chevrolet Colorado
Truck2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road
Reliability
Sensor Voltage Ref
0.1V – 5.0V Ref
Colorado SAE Mode $01
ECU Network Bus
500 kbps CAN-FD
ISO 15765-4 Compliant
Drivability Status
Drivable (Short Trip)
High urgency level
Est. Repair Cost
$100 - $600 (DIY: $30 - $150)
Parts & Labor DIY
Check P0316 On Another Chevrolet Model:
Diagnose P0316 on Specific Colorado Model Year:

1. Symptoms of P0316 on Chevrolet Colorado

When the Engine Control Module (ECM/PCM) on your Chevrolet Colorado (2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road) logs fault code P0316, drivers commonly observe:

Check Engine Light on on Chevrolet Colorado (2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road)
Engine shakes, sputters, and runs very rough immediately after cold start on Chevrolet Colorado (2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road)
Engine smooths out and runs normally after warming up for 1–2 minutes on Chevrolet Colorado (2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road)
Accompanying misfire codes (P0300, P0301-P0308) on Chevrolet Colorado (2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road)
Chevrolet Colorado OBD-II Port Location
The 16-pin diagnostic connector is located Under driver side dashboard, left of center stack. Plug in your scan tool to verify freeze-frame sensor values.

2. Most Likely Causes on Chevrolet Colorado

Historical warranty claims and technical repair bulletins for Chevrolet Colorado point to the following failure distribution:

55%
Coolant leaking into cylinder overnight from failing head gasket or intake manifold (Chevrolet OEM Part)
25%
Leaking fuel injector dripping fuel into cylinder while parked (Chevrolet OEM Part)
12%
Worn spark plugs with excessive gap or moisture on ignition boots (Chevrolet OEM Part)
8%
Carbon buildup on intake valves preventing cold fuel vaporization (Chevrolet OEM Part)
* Source: Synthesized from NHTSA ODI field repair telemetry and verified OEM Technical Service Bulletin (TSB) repair tree frequency percentiles for Chevrolet Colorado.

3. Step-by-Step DIY Repair Guide for Chevrolet Colorado

01
Check Accompanying Cylinder Misfire Code

Check if P0316 is accompanied by a specific cylinder code (like P0303) to isolate which cylinder is misfiring on startup. on the Chevrolet Colorado equipped with 2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road.

Required Tool: OBD-II Scanner
02
Perform Cooling System Pressure Test

Pressurize cold cooling system to 15 PSI. Use a borescope camera through spark plug hole to check for coolant pool on piston top. on the Chevrolet Colorado equipped with 2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road.

Required Tool: Cooling System Pressure Tester, Borescope Camera
03
Inspect Spark Plugs and Coils

Remove spark plugs. Check for white coolant crust, fuel fouling, or cracked ceramic insulators. on the Chevrolet Colorado equipped with 2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road.

Required Tool: Spark Plug Socket, Ratchet
04
Perform Intake Valve Carbon Cleaning

On direct-injection engines, perform walnut shell blasting or chemical intake valve cleaning to remove cold carbon buildup. on the Chevrolet Colorado equipped with 2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road.

Required Tool: Intake Valve Cleaner Kit
05
Clear Trouble Codes and Test Overnight Cold Start

Clear DTCs and allow vehicle to sit overnight to confirm morning start is clean. on the Chevrolet Colorado equipped with 2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Chevrolet Colorado (P0316)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Chevrolet Colorado OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Chevrolet Colorado.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for Chevrolet ColoradoVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

Other Common Fault Codes on Chevrolet Colorado

Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Chevrolet Colorado:

4. Chevrolet Colorado P0316 FAQs

What causes code P0316 to trigger on a Chevrolet Colorado?

On the Chevrolet Colorado (2.7L Turbo 4-Cyl (310HP) / 3.6L V6 (308HP) / ZR2 AEV / Bison Off-Road), P0316 is most frequently caused by Coolant leaking into cylinder overnight from failing head gasket or intake manifold or Leaking fuel injector dripping fuel into cylinder while parked.

Where is the OBD-II port located on my Chevrolet Colorado?

On the Chevrolet Colorado, the 16-pin DLC diagnostic connector is located Under driver side dashboard, left of center stack. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.

Can I safely drive my Chevrolet Colorado with code P0316?

Caution. Engine misfires heavily for the first 30–60 seconds after starting, then smooths out. Given that P0316 carries a High severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.