P0457 on 2015 Dodge Charger
Technical troubleshooting wire for fault code P0457 specifically tailored for the 2015 Dodge Charger. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2015 Charger Symptoms
- 'CHECK FUEL CAP' message in dash display
- Illuminated Check Engine Light
- Slight gasoline vapor odor near fuel door
Likely Root Causes on 2015 Charger
- Loose, unclicked, or forgotten gas cap
- Cracked, dried out, or missing rubber O-ring gasket on fuel cap
- Cracked filler neck neck where gas cap seals
- Faulty EVAP fuel tank pressure sensor (FTP)
Step-by-Step Fix Protocol for 2015 Dodge Charger
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0457 set.
Inspect the sensor connector on the 2015 Charger engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0457 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2015 Dodge Charger (P0457)
OEM Tethered Fuel Gas Cap with O-Ring
Tight-sealing factory fuel cap resolves common EVAP small/large leak codes without workshop visits.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.