P0300 on Ford F-250 Super Duty: Fix & DLC Location
Factory diagnostic troubleshooting wire for fault code P0300 (P0300: Random or Multiple Cylinder Misfire Detected) specifically on the Ford F-250 Super Duty (2020–2026, 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8).
1. Symptoms of P0300 on Ford F-250 Super Duty
When the Engine Control Module (ECM/PCM) on your Ford F-250 Super Duty (6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8) logs fault code P0300, drivers commonly observe:
2. Most Likely Causes on Ford F-250 Super Duty
Historical warranty claims and technical repair bulletins for Ford F-250 Super Duty point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Ford F-250 Super Duty
Plug a handheld OBD-II scanner into the 16-pin port under the dashboard. Check if specific cylinder codes like P0301 (Cylinder 1) or P0304 (Cylinder 4) accompany P0300. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Remove the ignition coils, use a spark plug socket with ratchet to unthread spark plugs. Inspect electrode tips for carbon buildup, oil fouling, or burnt gaps. Replace with OEM iridium plugs gapped to spec. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Perform an ignition swap test: Swap coil from a suspected misfiring cylinder to an adjacent cylinder. Clear codes and re-scan. If the misfire moves, replace the faulty coil. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Inspect PCV hoses, intake boot, and vacuum lines for cracking or hissing sounds while engine idles. Smoke test the intake if necessary. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Add a bottle of premium fuel injector cleaner (e.g. Chevron Techron). Clear the OBD-II codes with your scanner and take the car on a 15-minute drive cycle to confirm readiness monitors reset. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Other Common Fault Codes on Ford F-250 Super Duty
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Ford F-250 Super Duty:
4. Ford F-250 Super Duty P0300 FAQs
What causes code P0300 to trigger on a Ford F-250 Super Duty?
On the Ford F-250 Super Duty (6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8), P0300 is most frequently caused by Worn or fouled spark plugs and damaged spark plug wires or Failing ignition coils or coil packs.
Where is the OBD-II port located on my Ford F-250 Super Duty?
On the Ford F-250 Super Duty, the 16-pin DLC diagnostic connector is located Driver lower kick panel near emergency brake pedal. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Ford F-250 Super Duty with code P0300?
No. Driving with a flashing check engine light causes irreversible catalytic converter damage. Given that P0300 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.