P0507 on Ford F-250 Super Duty: Fix & DLC Location
Factory diagnostic troubleshooting wire for fault code P0507 (Idle Control System RPM Higher Than Expected - Diagnosis) specifically on the Ford F-250 Super Duty (2020–2026, 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8).
1. Symptoms of P0507 on Ford F-250 Super Duty
When the Engine Control Module (ECM/PCM) on your Ford F-250 Super Duty (6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8) logs fault code P0507, drivers commonly observe:
2. Most Likely Causes on Ford F-250 Super Duty
Historical warranty claims and technical repair bulletins for Ford F-250 Super Duty point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Ford F-250 Super Duty
Spray brake cleaner around intake manifold gaskets; an RPM change reveals the leak location. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Gently clean carbon soot around throttle blade using throttle cleaner and microfiber towel. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Follow vehicle-specific ignition key on/off timing sequence or use OBD scanner to reset baseline idle. on the Ford F-250 Super Duty equipped with 6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8.
Other Common Fault Codes on Ford F-250 Super Duty
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Ford F-250 Super Duty:
4. Ford F-250 Super Duty P0507 FAQs
What causes code P0507 to trigger on a Ford F-250 Super Duty?
On the Ford F-250 Super Duty (6.7L Power Stroke V8 Turbo Diesel (500HP / 1,200 lb-ft) / 7.3L Godzilla V8), P0507 is most frequently caused by Intake manifold vacuum leak or Carbon buildup causing sticky electronic throttle body.
Where is the OBD-II port located on my Ford F-250 Super Duty?
On the Ford F-250 Super Duty, the 16-pin DLC diagnostic connector is located Driver lower kick panel near emergency brake pedal. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Ford F-250 Super Duty with code P0507?
Driveable, but braking distance may increase slightly due to high engine idle. Given that P0507 carries a Medium severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.