P0117 on GMC Acadia
Factory diagnostic protocol and troubleshooting wire for fault code P0117 specifically for the GMC Acadia (2021–2026, 2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD)).
1. Symptoms of P0117 on GMC Acadia
When the Engine Control Module (ECM/PCM) on your GMC Acadia (2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD)) logs fault code P0117, drivers commonly observe:
2. Most Likely Causes on GMC Acadia
Historical warranty claims and technical repair bulletins for GMC Acadia point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for GMC Acadia
Read ECT live PID on scanner. If it reads 284°F (140°C) or higher with engine cold, a short to ground exists. on the GMC Acadia equipped with 2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD).
Unplug sensor connector while watching live data. If temperature drops to -40°F (-40°C), the sensor itself is shorted. on the GMC Acadia equipped with 2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD).
If reading stays pegged at max with sensor unplugged, inspect harness for pinch points grounding against engine block. on the GMC Acadia equipped with 2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD).
Allow engine to cool, unscrew old ECT sensor from coolant crossover pipe or thermostat housing, install new OEM sensor with fresh thread sealant. on the GMC Acadia equipped with 2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD).
Bleed air from cooling system, clear DTCs, and verify normal temperature rise on live data. on the GMC Acadia equipped with 2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD).
Equipment for Diagnosing GMC Acadia (P0117)
VVT Oil Control Solenoid Valve
Restores accurate camshaft timing and oil pressure regulation on GMC Acadia.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on GMC Acadia
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the GMC Acadia:
4. GMC Acadia P0117 FAQs
What causes code P0117 to trigger on a GMC Acadia?
On the GMC Acadia (2.5L Turbo 4-Cyl (328HP) / 3.6L V6 (310HP AWD)), P0117 is most frequently caused by ECT sensor internal short to ground or Short circuit to ground in ECT signal wiring harness.
Where is the OBD-II port located on my GMC Acadia?
On the GMC Acadia, the 16-pin DLC diagnostic connector is located Driver lower knee panel. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my GMC Acadia with code P0117?
No. The ECU thinks the engine is at 280°F+ (overheating) and runs rich or disables cooling fan logic. Given that P0117 carries a High severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.