P0137 on Hyundai Tucson
Factory diagnostic protocol and troubleshooting wire for fault code P0137 specifically for the Hyundai Tucson (2021–2026, 2.5L Smartstream 4-Cyl (187HP) / 1.6L Turbo Hybrid (226HP) / PHEV (261HP)).
1. Symptoms of P0137 on Hyundai Tucson
When the Engine Control Module (ECM/PCM) on your Hyundai Tucson (2.5L Smartstream 4-Cyl (187HP) / 1.6L Turbo Hybrid (226HP) / PHEV (261HP)) logs fault code P0137, drivers commonly observe:
2. Most Likely Causes on Hyundai Tucson
Historical warranty claims and technical repair bulletins for Hyundai Tucson point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Hyundai Tucson
Listen for exhaust ticking or black soot around flex pipe, flanges, and sensor bungs before the catalytic converter. on the Hyundai Tucson equipped with 2.5L Smartstream 4-Cyl (187HP) / 1.6L Turbo Hybrid (226HP) / PHEV (261HP).
Monitor B1S2 voltage. Snap the throttle to enrich mixture; voltage should briefly spike above 0.8V. If it remains 0.0V–0.1V, sensor is defective or shorted. on the Hyundai Tucson equipped with 2.5L Smartstream 4-Cyl (187HP) / 1.6L Turbo Hybrid (226HP) / PHEV (261HP).
Unplug harness, remove old sensor with 7/8 socket, install replacement sensor and plug firmly. on the Hyundai Tucson equipped with 2.5L Smartstream 4-Cyl (187HP) / 1.6L Turbo Hybrid (226HP) / PHEV (261HP).
Clear DTCs and verify B1S2 holds steady between 0.45V and 0.75V during steady highway cruising. on the Hyundai Tucson equipped with 2.5L Smartstream 4-Cyl (187HP) / 1.6L Turbo Hybrid (226HP) / PHEV (261HP).
Equipment for Diagnosing Hyundai Tucson (P0137)
Hyundai Tucson OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Hyundai Tucson.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Hyundai Tucson
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Hyundai Tucson:
4. Hyundai Tucson P0137 FAQs
What causes code P0137 to trigger on a Hyundai Tucson?
On the Hyundai Tucson (2.5L Smartstream 4-Cyl (187HP) / 1.6L Turbo Hybrid (226HP) / PHEV (261HP)), P0137 is most frequently caused by Exhaust leak upstream of or directly at the Sensor 2 bung letting in fresh air or Faulty downstream oxygen sensor.
Where is the OBD-II port located on my Hyundai Tucson?
On the Hyundai Tucson, the 16-pin DLC diagnostic connector is located Driver footwell directly above brake pedal. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Hyundai Tucson with code P0137?
Yes. Vehicle is fully drivable, but Check Engine Light will remain illuminated. Given that P0137 carries a Low severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.