U0104 on Lexus RX
Factory diagnostic protocol and troubleshooting wire for fault code U0104 specifically for the Lexus RX (2020–2026, 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)).
1. Symptoms of U0104 on Lexus RX
When the Engine Control Module (ECM/PCM) on your Lexus RX (2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)) logs fault code U0104, drivers commonly observe:
2. Most Likely Causes on Lexus RX
Historical warranty claims and technical repair bulletins for Lexus RX point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Lexus RX
Clean snow, ice, mud, or dead bugs off front radar emblem. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Verify power feed to radar sensor. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Execute optical/radar alignment procedure if bumper was removed. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Clear DTCs and test cruise on highway. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Equipment for Diagnosing Lexus RX (U0104)
Lexus RX OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Lexus RX.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Lexus RX
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Lexus RX:
4. Lexus RX U0104 FAQs
What causes code U0104 to trigger on a Lexus RX?
On the Lexus RX (2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)), U0104 is most frequently caused by Blocked or dirty front radar sensor in grille/bumper or Blown radar module fuse.
Where is the OBD-II port located on my Lexus RX?
On the Lexus RX, the 16-pin DLC diagnostic connector is located Driver footwell above brake pedal assembly. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Lexus RX with code U0104?
Yes. Normal driving is unaffected, but Adaptive Cruise Control will not engage. Given that U0104 carries a Low severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.